Your Bright LED Shoes remote lets you control your shoes’ lights from up to three feet away using RF wireless technology—no direct line of sight needed.
First-Time Setup
- Remove the plastic film from the remote’s battery compartment to activate it.
- Turn on your shoes using the button located inside each shoe.
- Press the ON button on the remote to pair it with your shoes.
Power
- ON – Turns your shoes’ lights on
- OFF – Turns your shoes’ lights off
Solid Colors
Press any of the seven color buttons (Red, Green, Blue, White, Yellow, Aqua, Pink) to light up your shoes in that solid color.
Run Mode
Press RUN for lights that circle through multiple colors. For a single-color run effect, use the R RUN, G RUN, B RUN, or W RUN buttons to circle lights in just Red, Green, Blue, or White.
Strobe Mode
Use the R STROBE, G STROBE, B STROBE, or W STROBE buttons for fast-flashing lights in Red, Green, Blue, or White.
Auto Mode
Press AUTO to automatically cycle through all colors and patterns—sit back and let your shoes do the work.
Adjust Color & Pattern
Use m+ and m- to manually scroll through additional color and pattern combinations.
Troubleshooting
- Remote isn’t responding: Make sure the plastic film has been removed from the battery compartment, then re-pair by turning your shoes on first and pressing ON on the remote.
- Shoes won’t pair with the remote: Turn the shoes off and on again using the internal button, then immediately press ON on the remote to re-sync.
- Lights are dim or unresponsive: Your shoes may need to be recharged—connect the USB split cable to a power source for up to two hours.
- Remote works intermittently: Stay within three feet of your shoes for the most reliable connection, or replace the coin cell battery if the signal continues to weaken.